Women in Tech: Hedy Lamarr
It was back in 1941 when Hedy Lamarr, an Austria born actress, together with George Antheil co-patented a “secret communication system” which allowed radio control of torpedoes that could not be easily discovered, deciphered or jammed. Her secret: frequency hopping! Coordinated, rapid changes in radio frequencies would literally “hop” in the radio spectrum, thus evading detection and the potential of interference, in other words, being suppressed or jammed. Even though her idea was ahead of its time and not implemented in the U.S. until 1962, when it was used by U.S. military ships during a blockade of Cuba (after the patent had expired), it is now the basis for modern Frequency Hopping Spread Spectrum (FHSS) wireless communication systems. FHSS wireless systems are very resilient when it comes to impairments such as interference (deliberate or coincidental) and “jamming.” Other effects can be observed when wireless signals travel through space, such as the “multipath” phenomenon, simply because they use only very small amounts of radio spectrum at a time and don’t dwell (or remain) at that frequency long, instead “hop” to another frequency quickly. Statistically, chances are that the signal does not “land” at the interfering frequency, thereby successfully evading the jamming signal. This makes Denial of Service (DoS) attacks on FHSS systems very difficult, albeit not completely impossible. Information Pioneers – Hedy Lamarr Edition As part of BCS, The Chartered Institute for IT video series, Miranda Raison presents Hedy Lamarr for the “Information Pioneers” series and dives deeper into the history behind one of wireless communication’s leading ladies who, together with George Antheil, pioneered the beginning of a communication revolution. Hedy Lamarr would’ve been 101 years old this November.
Outdoor Wi-Fi Solution in Your Future?
Is an outdoor Wi-Fi solution in your future? Modern Sensor-to-Server (S2S) communication networks call for high-speed solutions that support massive amounts of data collection, control and transport. Today, industrial organizations are experiencing high demand for voice, video, data and sensor (VVDS) information in wireless outdoor networks. The challenge is finding Wi-Fi networks that can ensure connectivity in outdoor environments that are often volatile and unpredictable. The good news — robust, secure outdoor Wi-Fi hotspot platforms designed for shorthaul communications enable a variety of data collection options that can withstand the harshest outside elements. Reputable outdoor Wi-Fi networks can leverage multiple networking protocols and services. They are designed to meet the needs of enterprise-scale communications across a wide range of critical infrastructure industries like oil and gas, utilities, mining, municipalities, perimeter security, disaster recovery, and outdoor recreation. Keep in mind this is just snapshot of the industries that can benefit from Wi-Fi – there are numerous applications in just about any outdoor Internet of Things (IoT) network. Outdoor Wi-Fi | Real-life Scenario Recently, an electric power company based out of North Carolina needed to transition the Direct Load Control (DLC) switches for its residential load management program. The transition affected 275 air conditioning (AC) units across two rooftops at a residential senior living community. WavePro (WP201) shorthaul point-to-point and Wi-Fi platform units were used to enable the transition. In this instance, Wi-Fi was leveraged to increase the Load Management System’s (LMS) effectiveness by creating two-way communications to switch monitoring and control, instead of the previous one-way paging system that was in place. A local internet service provided communications from the LMS to a rooftop Internet Point of Presence (PoP). Additional solutions, including Wi-Fi enabled controllers and Wi-Fi access points (four WavePro Units) were selected for the installation. The WavePro units were configured to solve three communication requirements in the Wi-Fi network: wireless communications between the controllers and a WP201; wireless communications between the four WP201s on the two rooftops; and communication between one WP201 and the single Internet PoP. The completed Wi-Fi solution enabled real-time communication between the LMS and each of the HVAC controllers on the two residential towers. The energy company can now effectively manage and confirm power curtailment events in real time. Win a WavePro Network You have a chance to win your own WavePro high-speed outdoor Wi-Fi network. Simply provide your application needs and tell us why you should win. Move fast —the contest ends this Friday, September 30. WavePro Features: IP67 rating to withstand extreme environmental conditions Advanced dual-band 2.4 GHz and 5.8 GHz capabilities that can cut through noise and congestion with band steering Self-discovery and self-healing mesh networking guarantee reliability Up to 1.3 Gbps broadband speeds deliver real-time Voice, Video, Data and Sensor links (VVDS™) Enter now: http://bit.ly/2czghui
Who Needs Rugged, Outdoor Wi-Fi Networks?
When we think about Wi-Fi, we tend to lean towards the idea of connections that allow us to access our mobile devices. With a Wi-Fi connection we can stream videos, access our apps, check email, work and basically manage our digital lives. In non-traditional settings, the need for outdoor Wi-Fi connectivity is increasing, but it is accompanied by some unique challenges. Outdoor Wi-Fi Connectivity Industries that operate mostly outdoors are finding a greater need for Wi-Fi connectivity. Campgrounds are providing Wi-Fi as both an amenity and as a tracking and booking tool for managers and campers alike. Golf courses have deployed industrial-scale Wi-Fi networks to monitor irrigation, golfers and other assets throughout a course, and marinas are using Wi-Fi networks for both communication and vessel management needs. There has also been a strong uptick in the use of industrial Wi-Fi networking for security programs and disaster response. Companies can use high-speed Voice, Video, Data and Sensor (VVDS) data transport as building blocks for a security network capable of real-time monitoring. These Wi-Fi solutions are especially ideal for video monitoring, as they provide the bandwidth necessary to transport large amounts of data. Disaster response has also been an ideal application for industrial-scale Wi-Fi. Often times, cell networks can get knocked out during environmental disasters, effectively eliminating a critical component for communication. Today, organizations can deploy these Wi-Fi platforms on vehicles or other response assets that can enable communications in emergency or disaster situations. For any industry with outdoor operations, assets will be exposed to the worst natural elements – extreme heat, freezing temperatures, heavy snow, strong wind, dust storms and more. The challenge is finding a shorthaul, Wi-Fi solution that is rugged and secure enough to withstand the elements, but also advanced enough to enable new types of high-speed, high throughput application solutions. Rugged Wi-Fi Communication Solutions There are solutions designed for robust, secure transport of VVDS information for the edge devices in industrial communication networks. These rugged, shorthaul communication networks are specifically designed for outdoor Wi-Fi connectivity and have proven reliability in extreme environmental conditions. These types of solutions are ideal for oil and gas, utilities, mining, power plants, municipalities, disaster recovery or any other type of industrial applications. They also suit innovative deployments at golf courses, marinas, campgrounds and other settings that require outdoor Wi-Fi connectivity. How would you like to have Wi-Fi connectivity for your own outdoor networks? FreeWave just launched a new contest and the winner will receive their own network of rugged, outdoor Wi-Fi solutions. Enter Today! Contest Closed Enter today for a chance to win FreeWave’s award-winning WavePro WP201shorthaul and Wi-Fi solution. Contest entrants must provide a high-level account of the application of the WavePro, along with a description of the need for the platform. Winners will be announced at the close of the entry period. To enter the contest, please visit http://go.freewave.com/wavepro-network-giveaway. Submissions are due by September 30.
Thinking Outside the Box with Sensor-2-Server Applications
When we talk about Sensor-2-Server (S2S) applications, we tend to lean towards examples of common industrial communication networks for industries like oil and gas, utilities and municipalities. These application solutions typically incorporate the transfer of data from edge devices back to a specific server for use cases such as pump and tank monitoring or SCADA systems. However, as Machine-to-Machine (M2M) communications transform alongside the adoption of the Internet of Things(IoT), the types of applications that require connectivity at the edge are virtually endless. If we step back and look at the big picture, it is clear the entire landscape of technology is changing. With these changes we foresee the decline of standalone RF technology. Decision makers need Big Data in to make intelligent decisions that will transform their business operations and save them time and money. S2S communication networks are designed to address this challenge by driving intelligent transmissions from a specific location back to the appropriate server with the necessary intelligence to drive action for change. As technology evolves to meet industry demands, RF technology must adapt to meet new needs. We’re already seeing this happen in the industrially hardened, wireless communications industry. Some wireless IoT communication solutions providers are offering platforms to host third-party applications in addition to creating the communication links for devices. Sensor-2-Server Solution Along with this widespread technology change, we have begun to see new and exciting ways that modern RF technology solutions can be leveraged in an S2S network. Here are some nontraditional real-life examples of S2S applications: S2S communications to connect satellite communication dishes in remote locations where there is little to no cell coverage. The solutions extend communications and create a single POC for all of the remote locations. Monitoring cold storage food at distribution centers for a large US Supermarket chain where the cold storage warehouses are 500 feet X 500 feet and are located several hundred feet away from the monitoring room. RTK base station communications to improve data and correlation for an Electric Car manufacturer. Remote access to GPS Stations for improved data transfer in order to complete ocean mapping. Irrigation control on golf courses. For most industrial organizations there is a clear push towards complete connectivity from the sensors at the edge of the network all the way back to the central server. We often talk about data collection for familiar applications in oil and gas, utilities and smart cities. However, the reality of today’s technology transformation is that any industrial communication network, regardless of the industry, will likely need to connect its edge devices and eventually program its edge through third party applications in order to take the most cost effective approach and drive intelligent operational decisions.
All Aboard the IoT Railway
In many parts of the world, rail represents a major component of infrastructure – for the transportation of both humans and goods. In fact, railways are critical to some of the major industries like oil and gas, agriculture, and food refrigeration/transport. Much like those industries have, over the years, adopted automated, machine-to-machine (M2M) technology, railroads have similarly deployed more advanced technology over the years as well. Railways began the “automation” process by adding Automatic Equipment Identification (AEI) tags back as early as 1989. These sensors track the specific item tagged, but they have no way of knowing how the train is operating as a whole. Companies also began deploying RFID tags to track goods being transported along the different lines. The AEI sensors could provide information on the rail car and would interact with the various readers along the route. The additional sensors were great for location awareness, but still lacked the ability to monitor all the moving parts on the train. Still, with these two initial steps, the early stages of Internet of Things (IoT) technology began to come into focus for the railroad industry. IoT Railway Solution The rail industry needed a way to develop a more intelligent infrastructure that enabled Sensor-2-Server (S2S) data transmission via a network of Wi-Fi and voice, video, data and sensor control systems. Due to the massive amount of data collection a system like this would develop, railways are now developing a fully digital service that is directed toward centralized facilities capable of aggregating data from different sources and streams and analyzing that data in real-time. For instance, today, railroad sensors monitor everything from rail car and locomotive health, to track conditions, air temperatures, stress gauges and component conditions. Having a centralized system allows operators to take that data being collected and use it to develop predictive maintenance practices; that is, the ability to predict when a section of rail or a specific component is in need of repair or near failure. Predictive maintenance is only one component of IoT integration for the rail industry, but it is one that can potentially transform practices across the board, ultimately saving companies time and money – valuable elements for an industry centered on logistics. Across the pond, the University of Huddersfield’s Institute of Railway Research has found that tracks can be monitored with inexpensive sensors set to operate by the vibrations of oncoming trains. According to the research, the sensors will still operate if one of the sensors is damaged, because of a built-in fail-safe. These sensors are projected to detect both approaching trains and the real-time conditions of the track. Adding an IoT network to trains can help improve safety and efficiency with traffic congestion, monitoring and control speed. Even the non-critical business operations have the ability to operate efficiently on the train with the help of modern sensors. Beyond rail sensor networks, there is also the consideration of the passengers as well. If railroads can implement Wi-Fi networks on passenger cars, passengers will be able to receive travel updates, railroad companies can develop specific apps for their travelers, and riders can enjoy the utility of internet in areas that previously lacked service. Although rail remains largely an industrial consideration in the United States, the growth of IoT technology available to the greater industry bodes well for the continued development of this infrastructure around the world.
Smart Golf Courses = A Hole in One!
Smart golf courses are coming to a green near you. A modern day golf course requires many things, including real-time monitoring for irrigation and pump systems, automated vehicle location capabilities for carts and players, and the ability to provide employees with the internet connectivity necessary to manage the sprawls of the course itself. As a result, golf course managers are turning toward some of the cutting edge Internet of Things solutions on the market to meet that demand. As far as preferred pastimes go, golf ranks relatively highly for young and old alike. In fact, according to the National Golf Foundation, there are more than 15,000 18-hole golf courses throughout the United States. The American Society of Golf Course Architects estimates that a full-size golf course would need up to 200 acres of usable land, which means that courses in the U.S. take up at least three million acres. By comparison, that’s nearly three times the size of the Grand Canyon National Park. With that in mind, the management of golf courses is a minor feat in advanced agricultural practices and logistics. Smart Golf Course Solution For one Colorado course, the smart golf course solution to its connectivity conundrum lay in the deployment of an industrial-scale Wi-Fi network capable of handling communication, accessibility and maintenance needs. Course managers selected a dual-band, mesh networking platform that provides Wi-Fi coverage in the necessary areas, and with the help of the provider, set up a network that strategically positioned the platforms so that devices and sensors could remain connected via the mesh networking capabilities as they moved from place to place. However, any outdoor Wi-Fi network does come along with its challenges. For example, another factor that golf courses need to consider when determining the best networking option is the weather. Although most courses are situated in areas that don’t typically draw extremely cold temperatures, many are consistently faced with hot or humid climates that can knock networks offline as the communication platforms succumb to the elements. The last thing any course manager wants is to have their communication network fail, especially if that impacts their customer experience. Adopting ruggedized outdoor networking and communications solutions means being confident that the platforms are designed to function without failure – even in areas with extreme weather events or consistently hot temperatures. Additionally, to ensure that the data being collected from irrigation and pump systems is being delivered in real-time allows grounds teams to monitor and predict when the systems are in need of maintenance, or when certain areas of the course are in greater need of water than others, for instance. Today, grounds crews can track this data via handheld devices that can quickly aggregate and analyze data, rather than spend time manually checking each individual service point. Although modern golf courses often look pristine to players and observers alike, upkeep and ongoing service requires constant attention. As these courses begin to deploy more advanced networking systems to become smart in its communication and monitoring practices, the ability for courses to streamline workflow and maintenance needs will only continue to grow.
Emergency Response From Sensor-2-Server
Emergency response agencies are adding Sensor-2-Server (S2S) communication technologies to their tool belt, thus changing the way our local municipalities operate. As we head in the direction of a more connected world through the Internet of Things (IoT), we see increased efficiencies within our cities and local government operations. For example, municipalities can leverage S2S technology for monitoring and control of their traffic management systems to improve flow of traffic to support community growth or pain points within the local traffic infrastructure. These Smart City types of applications also extend into emergency response. Large scale emergency situations and natural disasters often lead to disabled or overloaded cell towers and disconnected Wi-Fi. When all forms of communication are severed, first responders face the challenge of conducting rescue efforts with extremely limited visibility into identifying which locations require immediate help and conditions of the affected locations. If local government or municipalities leverage Smart City applications to stay online during emergency and disaster recovery situations, response times increase, risk decreases and lives can be saved. A Sensor-2-Server (S2S) solution robust enough to maintain communications during worst case scenarios will provide a mission critical communication link that keeps responders connected. Further, solutions that support voice, video, data and sensor (VVDS) information can aid in complete, accurate assessment during the emergency as well as detailed follow-up after emergencies and disasters are over. Finding a New Solution for Emergency Response Secure wireless communications are a key component to successful emergency response and disaster recovery for Smart Cities. With technology specifically built for harsh outdoor, industrial locations and proven to perform under the most extreme environmental conditions, local governments and municipalities can create emergency response and disaster recovery protocols that would significantly reduce collateral damage. Wireless shorthaul communications solutions with robust Wi-Fi links support VVDS, giving responders a substantial advantage during emergency situations. In a situation where every moment counts, having that connection could make the difference in saving someone’s life. Benefits of Leveraging S2S Solutions with Emergency Response Agencies Functioning even when power outages are plaguing a city, there are a number of ways a Sensor-2-Server type of network can be leveraged by the local government: ⇒ Reduce Risks Significantly reduce the risk of injury for firefighters and first responders. By leveraging video, responders can examine and assess damage after a weather-related incident without having to enter unsafe buildings or areas. ⇒ Assess the Situation Streamline the post disaster assessment by first responders from all directions and relay critical information to headquarters. By leveraging voice and video capabilities responders get an accurate assessment of a situation from every angle and create a faster, safer evaluation than a manual process. ⇒ Increase Response Time When communication networks are down, emergency crews can leverage the secure wireless edge network. Emergency crews can respond faster because messages and instructions are relayed via VVDS rather than manually. ⇒ Protected Data Keep unwanted parties out of the network. Leverage secure encryption capabilities to prevent data hijacking and increase network security. Some solutions will offer a secure, dedicated channel for emergency communications that does not interfere with tactical plans. When a municipality becomes a Smart City, first responders can be highly effective and are better able to protect themselves from the dangerous situations they face. As S2S communications shape the future of municipal communication networks, voice and video can be incorporated into the network. With this new, rich data, emergency management teams can enhance their emergency response protocol and improve emergency planning.
Behind the Scenes: Airports Across the Country
Many of us have been in airports around the country a lot lately. Summer vacations are a time when families converge at our local airports, anxious to spend time with loved ones and get to their destinations for fun, relaxation and adventure. However, we tend to take for granted all that goes into running our airports, along with the safety and security required to ensure the smooth operation each airport requires. Plus, we generally only think about what is happening inside the airports, but the truth of the matter is, there is potentially more activity happening outside of the airport at any given time. From aircraft maintenance crews and air traffic controllers to airfreight handlers and runway security personnel, there is a slew of machines and people conducting airport operations outdoors that need to be coordinated and as efficient as possible. According to a 2010 report by the Bureau of Transportation Statistics, a total of 631,939,829 passengers boarded domestic flights in the United States that year. This averages to 1.73 million passengers flying per day. It’s mind-boggling to think how this number has increased since that time as it’s clear that general aviation airports of all sizes are an integral part of our National Aviation System. Many airports have aging facilities, shifting demands to accommodate the changes in the general aviation industry, and diminishing revenue sources. These trends coupled with limited staff and budgets have made it difficult to properly maintain the facilities beyond responding to immediate needs. Automator of Airports The automation of processes and industrial communications can help. Setting up an outdoor industrial wi-fi network is one way field managers at airports can ease the burden of maintaining a safe and efficient infrastructure. For instance, establishing a hardened and ruggedized commercial-grade wi-fi network around the perimeter of an airport not only creates a safe and secure enclosed zone, but, also provides a way for maintenance crews to monitor and ensure the overall outdoor field operations of the airport facility. This can be easily achieved through resilient wireless networks because they allow for easy and relatively inexpensive modification as outdoor airport infrastructures and policies change (which can be frequent). In addition, besides obvious benefits to airport maintenance crews, there are indeed FAA requirementsthat need to be adhered to for compliance – making it even more imperative that airport facility personnel find more effective ways of ensuring proper airport operations and safety procedures are maintained at all times. Some examples of how outdoor wi-fi networks can assist in a smoother, more automated airport infrastructure include: Establishing a communications link with all airport maintenance crew through VoIP, video and data so that all personnel are able to communicate with one another and send immediate notifications if/when needed – saving time, effort and money. Adhering to FAA mandates which require personnel to provide reports on outdoor lighting, runways, vehicles and the overall airport infrastructure three times per day. Great efficiencies can be obtained through automating these various tasks reducing the amount of time and labor needed to maintain, monitor and report these things. Installing communication devices on airport maintenance vehicles connects all of them so that personnel can notify proper authorities of outages through their tablets versus manually having to inform supervisors that action needs to be taken. These are just a few of the ways an industrial outdoor wi-fi network can help airports maintain a safe, secure and well-functioning infrastructure. So what will the future airports look like and how will they operate? If the current IoT landscape has shown us anything its that any manual process or operation that can be automated through the use of machines or smart devices eventually will be (automated). As airport field operations continue to be held to higher standards and increasingly rigid regulations, the faster they can adapt to the pressures of an on-demand economy, the better.
(Industrialized) IoT App Development
Has IoT app development begun to take the globe by storm? A few weeks ago we discussed the growing need for more third-party app creation for the Industrial IoT industry. This week, we dive deeper and focus on those early adopters of industrialized IoT app development and what industries these “bleeding edgers” are serving. We all know by now the number of connected things is projected to grow massivelyover the coming years. Injecting new software applications into the industrial IoT world creates even more monitoring, control and usage of devices and data at the edge. Some would call this influx of software with industrialized hardware a modern marriage. The manufacturing sector, for example, seems to have found a use for implementing next-generation hardware to improve and automate operations, especially along the assembly line. At the same time, cloud-based software solutions are being leveraged to improve data analytics, thus improving actionable intelligence in real-time. What’s more is this new environment is incentivizing industrial manufacturers to cultivate new business models as they are finding that solutions they have developed in-house are as valuable as the hardware they manufacture. By tracking the performance of manufactured products in the field, manufacturers gain faster feedback loops and insights from customers. For example, instead of waiting months or even years for performance feedback, the integration of cloud-based software and modern hardware provides manufacturers this information in what is approaching real-time. This allows them to respond quickly with fixes, advice or, when needed, replacement equipment. As we enter into uncharted territory for many in this new interoperable, connected tech world, we have to also consider the cybersecurity measures in place and how it will combat any vulnerabilities as the surge of new, industrialized software applications enter our critical infrastructures. Security must be manufactured into the product from the very beginning – this includes tamper-proof hardware, authentication protocols, data encryption and more. What’s Next? Big companies like AT&T and Microsoft are joining forces for the good of the developer. We all can agree software is taking hold of certain business operations, so it is only natural companies would seek an easy solution for enterprise to bring about this change. The industrial side may appear to move slower when it comes to implementation, but that is only because of the various moving parts – machine-to-machine (M2M) devices, sensors and wireless technologies – that must sync with precision without missing a beat. Software is the enabler of this interoperability. So what is the next step in this industrialized development? Jeff Dorsch with Semi Engineering believes that, “Industrial Internet of Things (IIoT) applications proliferate in critical infrastructure, such as the power grid and water supply, the importance of the underlying software and the availability of an open-source platform for app development is coming to the forefront.” This fully-functioning data driven ecosystem will have to decide if open or closed systems are the best for their needs. Google and Apple, for example, have provided internet enabled ecosystems of devices. The problem is that they are closed ecosystems that limit which devices and which data can speak to each other. If industrial players want to take advantage and accelerate their own digital transformations, market opportunities and revenue, then they must take a closer look at open and secure technologies and start innovating for IIoT today. So as we all start to dip our toes in the industrialized software development pond, be sure to consider how your desired outcome matches the factors of delivering business value – customer responsiveness, security, revenue generation and operational efficiency. All are important in and of themselves, but different business models drive different decision-making. Embracing the IIoT app development opportunity early on might prove to be the smartest investment from a competitive advantage standpoint – being able to answer the “why” question is what will eventually separate the high-performers from the rest.
An Industrial IoT Anniversary
![](https://www.freewave.com/wp-content/uploads/2016/12/cyber-security-image.png)
Wow, what a year! This post marks the one year anniversary of publishing Industrial IoT top news, trends and highlights, and we wanted to dedicate a recap post to our favorite articles throughout the past year. In particular, a lot of attention has been paid to the happenings in precision agriculture, oil and gas, unmanned systems, the smart grid, public utilities, manufacturing, machines and machine learning, fog computing, big data, sensor technology, wireless technology and cybersecurity, to name a few. Read on for the top 10 articles we’ve posted since last August and make sure to see the special bonus at the end! Precision Ag: Big data is precision agriculture’s best tool to feed the world By @LuxResearch | Published on @AgProfessionalhttp://www.agprofessional.com/news/big-data-precision-agriculture%E2%80%99s-best-tool-feed-world“Big data can be the most flexible tool for increasing the efficiency of food production through precision agriculture – a quantified approach to cultivation that uses sensing, input modulation, and data analytics to enhance the efficiency of agriculture.” Oil and Gas: In the digital oil field, “no wires” is a no-brainerBy Zach Wertenberger @WPXEnergy | Published on @WorldOilhttp://www.worldoil.com/magazine/2015/september-2015/features/in-the-digital-oil-field-no-wires-is-a-no-brainer“Wireless technology plays an integral part in the day-to-day operations of virtually every industry on the planet. However, if you spent your time visiting most of the world’s oil fields, you wouldn’t believe that.Despite being a rather obvious fit with the inherent nature of the oilfield services sector (OFS), wireless I/O has been adopted by producers at a slow pace, with most continuing to rely upon miles and miles of fault-prone wire to connect onsite control centers with wellsite instrumentation.” Smart Grid: Wireless Lifts Focus on Grid Resiliency By Brad Gilbert @freewavetech | Published on @POWERGRIDmaghttp://www.elp.com/articles/powergrid_international/print/volume-21/issue-6/features/wireless-lifts-focus-on-grid-resiliency.html“Industrial Internet of Things (IIoT) networking technology and wireless Machine-to-Machine (M2M) communications solutions are critical to the daily operations of an increasingly connected and industrial world. With a greater dependence on providing reliable and secure high-speed connectivity to personnel, smart devices, machinery and many other geographically dispersed assets, electric utility operators require powerful, yet flexible, communications solutions for their business demands.” Utilities: Wastewater Treatment: Out of Sight, Out of Mind (Thanks to IIoT)By Scott Allen @S_Allen_IIoT | Published on @Ulitzerhttp://scottallen.ulitzer.com/node/3527211“Water is a crucial piece of any city’s – or country’s – infrastructure. The United States is fortunate to have some of safest drinking water in the world, for a number of reasons, one of which is its many water and wastewater treatment facilities.” Manufacturing: Bringing Smart Technology to Old Factories Can Be Industrial-Size ChallengeBy @mcoc | Published on @wsjhttp://www.wsj.com/articles/bringing-smart-technology-to-old-factories-can-be-industrial-size-challenge-1465351322“It’s a tantalizing vision: Bright and shiny factories where robotic arms and conveyors never break down and production goals are never missed—all thanks to internet-connected sensors that monitor machine health and respond to the slightest supply or logistics hiccup.” Machine Learning: 10 Ways Machine Learning is Revolutionizing ManufacturingBy @LouisColumbus | Published on @Forbeshttp://www.forbes.com/sites/louiscolumbus/2016/06/26/10-ways-machine-learning-is-revolutionizing-manufacturing/#3f10cd992d7f“Machine learning’s core technologies align well with the complex problems manufacturers face daily. From striving to keep supply chains operating efficiently to producing customized, built- to-order products on time, machine learning algorithms have the potential to bring greater predictive accuracy to every phase of production.” Fog Computing: Why IoT Needs Fog ComputingBy @BanafaAhmed | Published on @bbvaOpenMindhttps://www.bbvaopenmind.com/en/why-iot-needs-fog-computing/“The Internet of Things (IoT) is one of the hottest mega-trends in technology – and for good reason , IoT deals with all the components of what we consider web 3.0 including Big Data Analytics, Cloud Computing and Mobile Computing.” Sensors: The Army Wants to Implant Body Sensors into Combat SoldiersBy @tjenningsbrown | Published on @vocativehttp://www.vocativ.com/342014/army-body-sensors/“In the near future, American soldiers might all be implanted with a sensor before going to battle.The United States Department of Defense is interested in monitoring the health of soldiers in real-time. But wearable health trackers have faults and limitations. That’s why the Army Research Office and Defense Advanced Research Projects Agency have awarded $7.5 million to San Francisco-based Profusa to develop tissue-integrated health-monitoring sensors for service members.” Wireless Tech: Industrial Wireless RevolutionBy Soliman A. Al-Walaie @Saudi_Aramco | Published on @ISA_Interchangehttps://www.isa.org/intech/20151001/“Wireless technology is an essential business enabler for the automation world. It has gained rapid acceptance in many industrial sectors because of its cost effectiveness, reliability, fast deployment, and flexibility. Over the past four decades, ultrahigh frequency (UHF) radios have been widely used for long-range supervisory control and data acquisition (SCADA) connectivity in the oil and gas and power and utility sectors.” Cybersecurity: Navigating Industrial IoT risk and complexityBy @EStarkloff | Published on @AMDMaghttp://www.aerospacemanufacturinganddesign.com/article/amd1015-industrial-iot-complex-systems/“As massive networks of systems come online, they will need to communicate with each other and with the enterprise, often over vast distances. Both the systems and the communications need to be secure or millions of dollars in assets will be put at risk. One example of the need for security is on the smart utility grid, which is on the leading edge of the IIoT.” Bonus! Eliminate the cost of your next IIoT deployment Now is the time to brave the digital transformation in your industry while you continue to future-proof your systems. All you need to do is submit a use case for your radio network for a chance to win a next generation industrial wireless IoT solution. All entries must be received by August 19th. FreeWave will announce the winner on August 31st chosen based on submission (US and Canada only). The winning network must be deployed by October 31st. In return for the free radio network, the winning candidate will be able to gain additional promotion of their installation and network implementation! Submit here for your chance to win: http://bit.ly/2awdmkC. Learn more about ZumLink.