Solving The Challenges of Remote Wi-Fi in the Industrial Internet of Things
Most of us can relate to the frustration of when the Wi-Fi is down, or running slowly, or if we travel away from an established network and aren’t able to connect to another one nearby. The lack of Wi-Fi makes it impossible to check our emails, look up something on the internet, connect with others, or get our work done efficiently. In short, it makes us feel a little helpless and a whole lot of cranky because we’ve become way too accustomed to getting the information we want – when we want it – and staying in 24/7 connection with our world. Now, if we’re challenged by our Wi-Fi experiencing a service blip in a metropolitan area, imagine a remote industrial setting like an oil pad, a water treatment plant, or a rural electric tower. All of these reside in what is known as the access layer – or at the very outer edge of an IT network. Not only is there usually no internet connectivity in the access layer, but these devices are typically operating in rugged terrain where they’re experiencing extreme and volatile weather conditions such as wind, snow, blistering heat, tornadoes, dust storms, etc. Each of these access layer settings is part of a larger industrial Internet of Things (IIoT) network that connects the information gathered from local sensors that transmit or receive operational data. From there, they pass it along through subsequent network touch points all the way to the IT department at headquarters where this data is collected, analyzed, and acted upon for improved decision making. So, at the access layer – sometimes in the middle of nowhere where there can be no Wi-Fi networks for miles – talk about being disconnected from the world! Adding the environmental component to that, as well as the fact that most of these remote sites aren’t adequately monitored and data security is at risk, it makes your occasional Wi-Fi challenges seem a bit tame, yes? Here’s where wireless IIoT communications technology can help transmit this critical sensor data from remote industrial locations with no Wi-Fi connectivity all the way to where they’re supposed to go – and at very high speeds. This week, FreeWave is launching its new WavePro™ WP201 shorthaul and Wi-Fi platform that delivers secure collection, control, and transport of Voice, Video, Data, and Sensor (VVDS™) information from the access layer. Think of it as high-speed, rugged Wi-Fi connectivity that can be positioned in that oil pad, power plant or wherever Wi-Fi is needed. It will not only connect these sensors to the internet, but can also transport voice and video to create an instant in-field network, provide greater visibility into what’s going on at these sites, and better protect remote assets. The Advent of Short Haul and the Access Layer Change is inevitable, and change is taking place in SCADA, M2M and IIoT networks. SCADA networks started as networks that transported periodic process updates and used low bandwidth networks with longer links to meet their mission. Today, remote SCADA and Wi-Fi networks are transporting more data from more sensor data with greater frequency in order to drive operational efficiency into business processes. SCADA and M2M networks are becoming more multi-functional than their predecessors. These networks are transporting more than sensor data from the remote site to the enterprise. These networks linking remote sites to the enterprise network are now transporting: Video for remote process monitoring, enhanced site security and theft deterrence Voice, since cellular coverage is not ubiquitous Data so field personal have access to information needed to work efficiently This combination of data types is what FreeWave terms as VVDS™ (voice, video, data and sensor). VVDS transport is now a requirement for your wireless network. Another change occurring in traditional SCADA networks is that link distances are decreasing. In the past, SCADA networks with wireless links of more than 10 miles were common. Today, wireless links in excess of 10 miles typically use high speed, microwave, point-to-point (PTP) systems because of the increased capacity demands of VVDS. The WP201 links the formerly unconnectable and is designed to not only meet the harshest environmental conditions, but also encrypts the data to keep it secure and protected. It can be used in a wide variety of industries like oil & gas, utilities, mining, disaster recovery, facility automation – anywhere where field sensor information needs to be transmitted to servers for Sensor-2-Server™ (S2S™) connectivity. The applications are almost limitless. With higher speed, shorter wireless links, FreeWave defines wireless networks in three tiers: Long Haul (or the Distribution Layer) are wireless links from 5 miles, and greater and are typically implemented using high speed, PTP microwave systems. Short Haul (or the Aggregation Layer) are wireless links from 1 to 8 miles that are easily implemented using high speed, 2.4GHz or 5GHz radios with directional antennas to create point-to-multipoint (PMP) networks for data and information aggregation, or PTP links that provide network ingress/egress points. Close Haul (or the Access Layer) are PMP networks with wireless links operating from a few feet to a couple of miles to transport VVDS data. Designing and deploying wireless networks using a layer approach that enables each layer to be optimized for transport and for cost ─ leveraging the right equipment at the right point. The WP201 and its remote Wi-Fi and short haul capabilities is the first in a series of S2S products that FreeWave is offering to be that critical communication bridge in the IIoT world. So in your own operations, what are some ways you might incorporate the WP201 into your network?
Can You Hear Me Now? Remote Wi-Fi in the Connected World
(Image courtesy of Tony Webster, via Flickr Creative Commons) One of the more fascinating aspects of our eternal march toward ‘the future’ is the occasional, but impacting, intersection of our critical infrastructure and the general consumer. Like a sine wave across the axis, our connected world meets at points in time that catalyze technological explosions. The transition of computers from behemoth industrial-sized calculators into the first iteration of the personal computer is a good, somewhat recent example. So is the Internet. Each of those began as a fairly raw tool used for enterprise industrial services before intersecting with the consumer and birthing new innovations and applications.Today, the connected world on the horizon, envisioned by dreamers and pragmatists alike, is taking form on the backbone of wireless connectivity in a way that has the ability to impact our critical industries, our smart cities, our homes and our daily lives like never before. Remote Wi-Fi is a tool that has enabled connectivity and data transport for industries like oil and gas, precision agriculture, utilities and seismic monitoring, leading to a boom in the use of predictive analytics to better streamline the work processes in the field for these traditionally remote areas. However, two of the main problems with traditional remote wi-fi network deployment are the security of these networks, as well as the latency of the data transmission. To combat this, these industries have turned to the use of shorthaul (between 1-5 miles) wi-fi hotspots to utilize built-in security measures and decrease latency for data-intensive applications like voice, video, data and sensor connectivity. As a result, these industries have been better able to collect and transport data throughout an entire smart ecosystem, affecting everything from decision-making in the field, to the way the consumer can track personalized utility usage. Our smart cities and municipalities depend on data collected remotely to anticipate infrastructure-related resiliency issues, like grid outages, seismic events and disaster preparedness. Companies in these industries depend on remote data to solve production, maintenance and transport problems. Wi-Fi Will Save the Connected World In early January, the Wi-Fi Alliance, a worldwide network of companies trying to standardize global Wi-Fi provision, announced a new protocol that promises to trigger changes throughout the industrial landscape. Wi-Fi HaLow, as it is called, is an addendum to the IEEE 802.11ah protocol that is set to be finalized later in 2016. HaLow operates in frequencies below 1 GHz and can potentially provide a longer range than Wi-Fi has traditionally offered. The implications for remote Wi-Fi and the Industrial Internet of Things are huge. The addendum means more efficient battery usage due to operating on a lower frequency and with a lower data rate, which, in turn means a greater range and lower transmission power. This standard is still awaiting a final vote, so before we anoint HaLow as the magic bullet for which the Internet of Things has been waiting, the IEEE standards committee will have its say. To come full circle, the potential advent of better long-range Wi-Fi in remote settings could be the next intersection of the axis and the sine wave, enabling innovation and growth at both the industrial and consumer levels of connected-world technology.
IIoT Top News: 2015 News Round-Up
Let’s take a moment and appreciate the excitement 2015 brought for the IIoT: As we look back at the top articles from the year, we were intrigued to learn that cooperative utilities actually have the largest penetration of smart grid meters per percentage of customers, according to Greentech Media and the U.S. Energy Information Administration. It’s interesting to see the largest publicly-owned utility companies in the U.S. are not the leader in deploying smart meter systems. Another topic that caught our eye this year focused on big data initiatives and how they will improve operational efficiencies by the large-scale storage and transfer of volumes of information safely and securely. Companies don’t always see the value in updating information governance policies because there isn’t always a direct reward and no direct penalty for non-compliance. Tim Jennings, Ovum chief research officer, believes as big data continues to grow within the company infrastructure, it is time to consider the security, availability, and time spent storing data. Speaking of Big Data… It is hard to grasp the magnitude of data transferred throughout the cloud. Today, as big data goes to work, it is transforming industrial facilities, and as Forbes states, “they have grown increasingly complex and yes, every machine, every pipeline, every transmission point collects data ready to be read.” Of course, a 2015 news review would not be complete without at least one mention of unmanned systems. Whether the want/need was for industrial, commercial or government applications, the thing on everyone’s mind was how many cool ways this technology could be deployed in the future. While there were many examples to choose from, DARPA certainly caught a lot of attention from its new autonomous submarine-hunting ocean drone. Yes, you read that right! Finally, as we ease our way into 2016, we would like to share the rest of the top technology and IIoT stories from 2015. This year’s round-up highlights articles about: utilities, manufacturing, oil and gas, wireless, big data, security, drones and industry analyst perspectives. Hope you enjoy this week’s roundup, and as always, tell us what we missed! Energy Six Ways IoT Enables Innovation in the Energy Industry (IT World Canada) The energy industry is learning to use IoT to its advantage. IT World Canada details six ways IoT is enabling innovation and improving overall cost and efficiency for the industry. Yogi Schulz with IT World Canada believes that “Applying these IoT advances to a range of energy industry problems will be a major factor in helping the industry return to profitability in the new, lower commodity price environment through innovation based on better data.” Manufacturing Machine Learning (The Economist) As manufacturing becomes digitized, the industry has to adjust from being a product-focused world to a services market, with smart machines installed on the shop floor. The Economist believes that “For many manufacturers—in Germany and beyond—the principal sticking-point in making this digital leap is often cultural.” Manufacturing’s Digital Future (Industry Week) The digital future of manufacturing will incorporate the data analytics, cloud and many other wireless IoT solutions. Industry Week believes “many companies are leveraging interconnectivity to improve their own factory productivity, the factory-floor blocking and tackling of reducing downtime, cutting costs, reducing cycle time, improving OEE, etc.” Oil and Gas In the Digital Oilfield, “No Wires is a No-Brainer (World Oil) With the digital progression of our world, it seems only fitting we would find IoT in the oilfield. The question we must ask is: “Why, in 2015, has wireless I/O not overtaken hardwired infrastructure as the industry standard throughout the OFS sector?” Big Data Internet of Things Transforming Oil and Gas Operations (RigZone) Analytical movement has increased as the cost of oil continues to drop, therefore forcing the oil industry to gravitate toward more big data and IoT. It has been said, “the amount of data generated by oil and gas operations is starting to explode as real-time information from sensors is being collected at a rate of four milliseconds.” Wireless Tech Darpa’s RadioMap Detects RF Spectrum Congestion (GCN) An interconnected connected wireless world has created congested airways, thus making military communication and intelligence gathering requiring radio frequencies be managed. “RadioMap adds value to existing radios, jammers and other RF electronic equipment used by our military forces in the field,” said John Chapin, DARPA program manager. Big Data The Ethics of Big Data (Tech.Co) Big data has been defined as information that has been either unstructured or multi-structured as way to transform data into value. Once you have given value to the data, it is important to realize who owns the data. Tech.CO says that “when it comes to big data ethics, privacy is not necessarily dead, shared information can still have a reasonable degree of confidentially, but big data can still compromise identity and other information that customers and businesses prefer to be confidential.” Security IoT Security Needs to Stop Being an Afterthought (PCR) In the age of smart homes and smart devices it is time to improve the IoT security across the board. The Internet Society (ISOC) recently released a white paper stating, “the vendors who use IoT should take more responsibility for the security issues that can occur with IoT products.” Drones Robo-Bulldozers Guided By Drones Are Helping Ease Japan’s Labor Shortage (The Verge) Komatsu had to find a way to complete construction projects, as Japan gets closer to the 2020 Olympics. The aging population makes it hard to find anyone able to complete the work. The fix Komatsu has found is to offer a service called Smart Construction where, “a team of robotic vehicles scoops rock and pushes dirt without a human behind the wheel. They are guided in their work by a fleet of drones, which map the area in three dimensions and update the data in real time to track how the massive volumes of soil and cement are moving around the site.” Deforestation: British Firm Developing Tree-Planting Drone to Counter Industrial-Scale Logging (The Independent) A British engineering company is hoping to get international backing for an automated tree planting drone system. The purpose of these drone planting fleet’s, would be not