Below is the Tech Conference schedule for 2008.  Course descriptions, training location details and hotel accommodations follow.

September 23-24 | Boulder, CO
November 18-19 | Boulder, CO

COURSE DESCRIPTIONS
The following is a description of the classes offered:

Basic Radio Programming
Learn how to configure each radio setting and the affect each setting has on radio performance. Additionally, you will create a simple network and configure radios using Hyperterminal. This session also includes an introduction to EZ Configuration, the configuration software.

Multipoint Networks and Advanced Radio Programming
Take the information learned from Basic Radio Programming and build upon it by creating more complex networks with serial and parallel repeaters. We will utilize settings such as subnet ids and repeater frequency. In-depth discussions will further explain how you can optimize your radio network by correctly setting radio parameters.

Network Diagnostics and Troubleshooting
Learn how to use CommControl and the diagnostic tools available in EZ Config. We will identify basic troubleshooting steps and then apply them in an exercise where you will troubleshoot problematic networks.

Wireless IO
Learn the proper application of the FGRIO family of radios including how to program the IO Master and IO Slave.

Modbus IO
Learn the proper application of the Modbus version of the FGRIO family of radios including how to program the Modbus Master and IO Slave, and how to utilize the Register Map to read and write values.

HTplus
Learn the proper application of the Plus family of radios including how to program the HT+ via a web browser and how to build a high speed backbone.

Big Dawg
Learn how to use the entire suite of FreeWave products and the configuration of each for specific applications.

Antennas/Installation/Path Studies
Learn tips for proper Antenna Selection, Installation, and the importance of path studies for corresponding applications.

Licensed Radio Programming
Learn how to set up a licensed radio network. Additionally we will discuss how to apply for a license with the FCC.

Notes:
The Technical Conference includes all meals as well as refreshments served throughout the day.
Hands on sessions require laptops with Ethernet ports and serial ports or USB-to-Serial converters.

TRAINING FACILITIES & HOTEL ACCOMMODATIONS

Boulder, CO
Training Facility: FreeWave Technologies Headquarters in Boulder, Colorado
Address: FreeWave Technologies, 1880 S. Flatiron Ct, Ste F, Boulder, CO 80301 map
Phone Number: +1 303.444.3862

Hotel Accommodations
Courtyard by Marriott
Address: 4710 Pearl East Circle, Boulder, Colorado 80301 USA map
Phone: +1 303.440.4700
Rate:  $155/night  Reservations:  Courtyard Boulder >>